Kikusui KHA3000, Руководство по эксплуатации, Страница: 320 / 392

320
KHA3000
Test Execution (Trigger Function)
TRIG:SOUR
TRIG:ACQ:SOUR
Each sets the conditions (trigger source) for actually starting measurement after reception of
the INIT command.
Command
TRIGger[:SEQuence[1]|ACQuire]:SOURce {BUS|IMMediate}
TRIGger[:SEQuence[1]|ACQuire]:SOURce?
Parameter Value: BUS Start measurement after waiting for a software trigger
(*TRG, IEEE488.1 GET (Group ExecuteTrigger)).
IMMediate Start measurement immediately (default)
Response
Returns the current setting of the trigger source in the <character> format.
Sequence 2 (RUSH)
INIT:SEQ2
INIT:NAME RUSH
Starts in-rush current measurement. The system enters the trigger signal wait state. It does
not respond to a device trigger.
Command
INITiate[:IMMediate]:SEQuence2
INITiate[:IMMediate]:NAME {RUSH}
Parameter Value: NAME
TRIG:SEQ2:SOUR
TRIG:RUSH:SOUR
Each sets the conditions for actually starting In-rush current measurement after reception of
the INIT:SEQ2 command.
Command
TRIGger:SEQuence2:SOURce {INTernal}
TRIGger:SEQuence2:SOURce?
TRIGger:RUSH:SOURce {INTernal}
TRIGger:RUSH:SOURce?
Parameter Value: INTernal Internal trigger (fixed)
Response
Returns the setting of the internal trigger in the <character> format.
** RST RST
** RST RST