Kikusui KHA3000, Руководство по эксплуатации, Страница: 312 / 392

312
KHA3000
Voltage Fluctuation Measurement Mode (General)
Setting the Nominal Values
VFL:NOM:FREQ
Sets the nominal frequency. Set the nominal frequency according to the rating of the EUT.
Command
VFLuctuation:NOMinal:FREQuency {50|60}
VFLuctuation:NOMinal:FREQuency?
Parameter Value: 50 or 60 (The default is 50.)
Unit: Hz
Response
Returns the nominal frequency in the <NR3> format.
VFL:NOM:VOLT
Sets the specified value of the nominal voltage.
Command VFLuctuation:NOMinal:VOLTage <NRf>
VFLuctuation:NOMinal:VOLTage?
Parameter Value: 100 to 600 (The default is 230.)
Unit: V
Response
The nominal voltage value is returned in the <NR3> format.
Comment Input
VFL:TEXT:COMM
Specifies comment items and sets comment texts. The ten types of comment items listed
below can be specified. The character string for each comment item is subjected to character
code encoding (normally Shift-JIS) that is set by the
“ SYST:CONFigure:TEXT:Encoding ”
command and further subjected to base64 encoding. This double encoding ensures a secure
transfer of character codes that cannot be represented by ASCII 7 bits. The ten types of
comment items are identified with suffixes (0, 1, 2, ..., 9) following the COMMent header.
Command
VFLuctuation:TEXT:COMMent <numeric>,<“encoded-string”>
VFLuctuation:TEXT:COMMent <numeric>?
Parameter Value: <numeric> Comment item
(0 to 9: all items
“ ” are specified by default.)
<“ encoded- string”> Comment character string, base64 encoding
Response
Returns comment texts in the <numeric> format.
** RST RST
** RST RST
** RST RST
• 0 “Memo” • 5 “Test Engineer”
• 1 “Model Name” • 6 “Operation Mode”
• 2 “Type” • 7 “Climatic Condition”
• 3 “Serial No.” • 8 “Supply Source”
• 4 “Company” • 9 “Reference Impedance”