Kikusui KHA3000, Руководство по эксплуатации, Страница: 300 / 392

300
KHA3000
Harmonic Measurement Mode (General)
HARM:STAN:LIM:CATalog
Queries available limit value standards.
Command
HARMonics:STANdard:LIMitation:CATalog?
Response
Returns available limit value standards in the <“string”>, <“string”>, <“string”> ... format.
Setting the Measuring Technique Standard
HARM:STAN:MTEC
Sets the measuring technique standard.
Command
HARMonics:STANdard:MTEChique[:NAME] <“string”>
HARMonics:STANdard:MTEChique[:NAME]?
Parameter Value: “IEC 61000-4-7 Ed2.0”
“IEC 61000-4-7 Ed2.0A1”
(default)
“IEC 61000-4-7 Ed1.0”
Response
Returns the measuring technique standard in the <“string”> format.
HARM:STAN:MTEC:CATalog
Queries available measuring technique standards.
Command HARMonics:STANdard:MTEChique:CATalog?
Response
Returns available measuring technique standards in the < “string” >, < “string” >, < “string” >...
format.
Setting the Standard Name
HARM:STAN:LIM:ALI
Sets whether the Limitation Standard and Measuring technique names are to be "Specified"
or unchanged from the "Standard" for presenting to Report Print.
Command HARMonics:STANDard:LIMitation:ALIas[:STATe] {ON|OFF|1|0}
HARMonics:STANDard:LIMitation:ALIas[:STATe]?
Parameter Value: ON(1) Yes (Specified name)
OFF(0) No (Standard name, default)
Response
Returns whether it is to be specified or not in the <NR1> format.
** RST RST
To perform a test based on the IEC61000-4-7 Ed2.1 standard, select “IEC 61000-4-7
Ed2.0A1 ”. The standard is set to IEC 61000- 4-7 Ed2.1 in test conditions, on the KHA3000
display, and in reports.
** RST RST