Kikusui KHA3000, Руководство по эксплуатации, Страница: 200 / 392

200
KHA3000
61000-3-11
●
Standard values of test impedance
Use these values when the current capacity of a power supply to be connected is 100 A or
more.
0.25

+ jn0.25

is for a single-phase EUT and 0.15

+ jn0.15

is for a three-phase
EUT.
This product cannot set the standard values of the above impedance. A selected or input
value in the menu is used for internal calculation.
No. Menu item Description Default
1 Judge Factor Select the condition item of Judge Factor. The items Pst and Plt cannot
be selected in manual measuring method.
Select the item with the small knob and press the ENTER key. Every
time the ENTER key is pressed, the check mark turns on or off. Multiple
checkboxes can be selected.
When multiple items are selected, the limit values of those items
become the conditions of the judgment. Pst,
Plt,
dc,
dmax,
d(t)>3.3%
2 Return Terminates the specification of Options of Judgment. –
3 Z test When the reference impedance in the 61000-3-3 standard is not used,
specify Test Impedance. Select the standard value 0.25

+ jn0.25

(single-phase) or 0.15

+ jn0.15

(three-phase) or “ Specified. ”
0.25

jn0.25

4 R
A
test (

) When “ Specified ” is selected in the F1 menu, input the resistance of
Test Impedance for each phase.
The input range is 0.00

to 1.00

.
Enter the value with the numeric keypad and press the ENTER key, or
use the large knob to increase or decrease the value.
0.24

5 X
A
test (

) When “ Specified ” is selected in the F1 menu, input the reactance at the
fundamental frequency of Test Impedance for each phase.
The input range is 0.00

to 1.00

.
Enter the value with the numeric keypad and press the ENTER key, or
use the large knob to increase or decrease the value.
0.15

6 R
N
test (

) When “ Specified ” is selected in the F1 menu, input the resistance of the
neutral line of Test Impedance.
The input range is 0.00

to 1.00

.
Enter the value with the numeric keypad and press the ENTER key, or
use the large knob to increase or decrease the value.
0.16

7 X
N
test (

) When “ Specified ” is selected in the F1 menu, input the neutral line
reactance at the fundamental frequency of Test Impedance.
The input range is 0.00

to 1.00

.
Enter the value with the numeric keypad and press the ENTER key, or
use the large knob to increase or decrease the value.
0.10

8 Return Terminates the specification of Test Impedance. –
3 Input 1-char Refer to Menu 3/4 of 61000-3-3 Standard. –
4 Delete 1-char –
5 Change char type –
6 Return –
7 Return –
8 Std. Name Select Standard
9 Input 1-char –
10 Delete 1-char –
11 Return –
12 Return –
9
Prev/Next Page 3/4
Switches to another menu page. –
F key: Function key. You can also use the ESC key to return.