Kikusui KHA3000, Руководство по эксплуатации, Страница: 168 / 392

168
KHA3000
View Setting Sub-menu
List
No. Menu item Description Default
1 Select View Items Select an item to be displayed. Select it with the small knob and press the
ENTER key. Every time the ENTER key is pressed, the check mark turns on
or off. Multiple checkboxes can be selected.
Current rms
Voltage rms Effective value of input voltage
Voltage Peak + Positive amplitude peak value of input voltage
Voltage Peak - Negative amplitude peak value of input voltage
Current rms Effective value of input current
Current Peak + Positive amplitude peak value of input current
Current Peak - Negative amplitude peak value of input current
Frequency Input frequency measured with input voltage
Real Power
*1
(W)
Real power (W) of the EUT
Apparent Power
*1
(VA) Apparent power (VA) of the EUT
Reactive Power
*1
(var) Reactive power (var) of the EUT
Power Factor
*1
Power factor of the EUT
THC Total harmonic current of input current, effective
value of all the harmonic current components from
the 2nd to 40th order
POHC Odd-order harmonic current of input current,
effective value of odd-order harmonic current
components from the 21st to 39th order
THD
*2
Total harmonic distortion factor of input current,
effective value ratio of all the harmonic current
components from the 2nd to the 40th order against
the effective value of the fundamental components
THD-I Total harmonic distortion factor of input current,
effective value ratio of rms current from the 2nd to
the 40th order against the effective value of the
fundamental components
PWHD
*2
Partial-weighted harmonic distortion factor of input
current, effective value ratio of all the harmonic current
components from the 14th to 40th order against the
effective value of the fundamental components
*1 In a three-phase three-wire connection, the

(sigma) values are the valid values. The values of each phase (L1 to L3)
carry no meaning, so they are displayed as "-----."
*2 In 61000-3-12 2011, THD becomes THC/Iref, and PWHD becomes PWHC/Iref. Iref is displayed as "-----," because it is
determined at the end of the test.
%
%
F1
Select View Items
Voltage rms
Voltage Peak +,
Voltage Peak -
Current rms
Frequency
Real Power (W)
Apparent Power (VA)
Reactive Power (var),
Current Peak +,
Current Peak -
POHC
Power Factor
F2
Scroll
(Input numeric value)
F5
L1
L2
L3
F6
Return
Check View Phase
THC,
PWHC/Iref THD/Iref, PWHD THD,
1
3
2
4
61000-3-12 2011
61000-3-12 2004