Kikusui KHA1000, Руководство по эксплуатации, Страница: 167 / 274

KHA1000
6-11
6
V
o
lta
g
e C
h
an
g
es
a
n
d
F
lu
ctu
atio
n
s a
n
d
F
lic
ke
r T
es
t
View Setting – > Sub Menu
A different sub-menu is displayed depending on the view type selected. The sub-
menus for the V/I waveform, rms waveform, and list are shown below. There is no
sub-menu for the Pinst (St) waveform.

V/I waveform

rms waveform

List
• RMS (Actual value rms): Actual value of input voltage and current
• PEAK+: Positive amplitude peak value of input voltage and current
• PEAK–: Negative amplitude peak value of input voltage and current
•
POWER (actual power): Actual power W of EUT
• VA (apparent power): Apparent power VA of EUT
• var (reactive power): Reactive power var of EUT
• PF (power factor): Power factor of EUT
• Freq (frequency): Input frequency measured at input voltage
F1 Horizontal Scale
×10 ×5 ×2 ×1
×1/2 ×1/5
Select the magnification to enlarge or reduce a view.
About one cycle is displayed by “1x.” The magnification
can be set before a test is executed. After the test is
executed, it is displayed in a pale color and not
selectable. In the window display, deg/div indicates a
phase angle/div.
F2
Vertical Scale
(Current)
×10 ×5 ×2 ×1
×1/2 ×1/4
Select the magnification to enlarge or reduce a view.
F3
Vertical Scale
(Voltage)
×10 ×5 ×2 ×1
×1/2 ×1/4
Select the magnification to enlarge or reduce a view.
F4 Cursor
Turn the small or large knob to move the cursor within
the window. The voltage and current values at the
cursor are displayed.
F3
Vertical Scale
(Voltage)
×10 ×5 ×2 ×1
×1/2 ×1/4
Select the magnification to enlarge or reduce a view.
F1 View Items
RMS PEAK+ PEAK- POWER
VA var PF Freq
Place a check mark by pressing the ENTER key. The
corresponding value is displayed. To remove the check
mark, press the ENTER key again (toggle operation).