Kikusui KHA1000 Скачать руководство пользователя страница 148 | Manualshive

Страница: 148 / 274

Kikusui KHA1000 Скачать руководство пользователя страница 148

5-46

KHA1000



Test may be interrupted

An abend dialog box is displayed. The test status display shown in the display

changes to “Analysis” and the progress bar in the display moves to the right end.
The menu “Save,” “Report Print,” “Exit,” or “Analysis (VIEW)” is displayed.

For details on the operation procedure, see "Aborting a Test" on page 5-45.

•

When measured values exceed the voltage or current range with

“Overrange Abort” selected as a test condition, the test is suspended.

5.5.3

Loading and Analyzing the Results File

This section explains how to load and analyze a result file. The result file can be
saved with an alias after it is analyzed. The loaded file cannot be overwritten.

The results file can be loaded in the “Setting” state. It cannot be loaded in the “Test”
or “Analysis” states.



Loading the results file

1.

Press the FILE key.

2.

Press the menu F2 key (Load



Results File).

The folder and the results file, which are stored on the compact flash card, are
displayed.

3.

Select a results file using menu F1 and F2 keys.

The background color of the selected file is reversed.

4.

Press the ENTER key to fix your selection.

The selected file is loaded into this product, and the display is updated. Becoming an
analysis state lets you analyze according to the menus.



Printing reports

1.

Press the HA or VIEW key.

The menus include: F1 Save, F2 Report Print, F3 Exit, F4 Analysis (VIEW), and F5
AC Pow. OUTPUT OFF.

Menu F5 AC Pow. OUTPUT OFF is a menu in the system setting display. It is
displayed when AC Pow. Control

“Enabled” is selected.

•

If you set the standard to IEC Ed5.0/Ed2.1 or IEC Ed5.0/Ed1.0, select Class C,
and set the limit values to 3rd/5th/Current Wave, you will not be able to produce
report printouts.

2.

Press the menu F2 key (Report Print).

Reports are saved to the compact flash card. When the report printing ends, the menu

“Report Print” is displayed in a pale color, and the function key is disabled.

When the optional ethernet port is mounted, reports can be output to a network printer.

CAUTION

See

See

See

«
...
146
147
148
149
150
...
»

Содержание KHA1000



















































































































































































































































































Отзывы:

Нет отзывов