Kikusui KHA1000, Руководство по эксплуатации, Страница: 110 / 274

5-8
KHA1000
5.1.3 Margins and Printout of Setting Values
Menu
Use this menu to set the standard limit value to 100. The setting range is 10 to 100.
Select 80, for example, when 80 % of the standard limit value is selected.
This value cannot be set during test and analysis.
Table 5-2 Color identification and judgment in graph or list
window
Page 4-16
This menu is for outputting the setting value using a specified printout format.

Saving the setting values to a test conditions file
Page 4-25
Save the setting values by file manipulation. See Section 4.6.4 “ Saving a Test
Conditions File .” A test conditions file can be saved to the specifi c folder of the
harmonic test mode. It can be saved in the “Setting” state but not in the “Test” or
“Analysis” states.
F 1 F 1
F 2 F 2
F 3 F 3
F 4 F 4
F 5 F 5
F 6 F 6
Page 3/3
F1 Margin (%)
Numeric
value
Color
identification
Measured value Judgment
Green
(Graphs only)
Up to the margin setting value PASS
Yellow
Greater than the margin setting value up to the limit
value
WARN
Red Greater than the limit value FAIL
F5 Print Press
See
See