Kikusui KFM2151, Руководство по эксплуатации

Страница: 45 / 112

KFM2151
3-11
Operation
3.6 Checking the Channels
Press the and keys or SHIFT+ and keys in monitor mode to select the
channel number (1 to 32). Channels whose scanned source is turned OFF are
skipped. The monitor LED shows the channel status.
Fig.3- 8 Monitor LED
Ta b le 3-3 Channel stat u s sho w n on the monitor LED
■
Impedance scanning
The VOLT/TERM display shows “-----”. The impedance is shown on the
KFM2150.
Page 3-14,
Ta b le 3-5
If all channels are not scanned, the CHANNEL display shows “x--”. (x is the unit
number.)
Fig.3-9 Impedance meter scanning
■
Voltage scanning
The VOLT/TERM display shows the voltage of the selected channel. If the range is
exceeded or the measurement is not possible, “-----” is shown.
Fig.3-10 V oltmeter scanning
LED Stat u s Description
On
Green Scanned so u rce channel not c u rrently selected.
Orange Selected channel.
Red O V P or U V P alarm is acti v ated.
Off Channel that is not scanned.
CH1 CH2
CH17 CH18
CH3
CH19
CH4
CH20
CH5
CH21
CH6
CH22
Illuminated (orange)
Illuminated (green)
Off
Selected channel: CH2
Scanned channel: CH1, CH2, CH4, CH6 to 32
See
Illuminated
Illuminated