Kikusui DSI1020 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 64

Kikusui DSI1020 Скачать руководство пользователя страница 42

42

DSI1020/ DSI3020

Installing the Test System

Connecting the power cable

Connect the power cable to the control power supply input (AC INPUT) terminal on the rear
panel of the product.

“Options” (p. 3)

1

Check that the AC power line meets the nominal input rating of the prod-
uct.

This product can be used with an input voltage ranging from 100 V to 240 V.

The supported frequencies are 50 Hz and 60 Hz.

2

Check that the POWER switch is turned off ( ).

3

Remove the terminal cover from the lower part of the rear panel.

For instructions on how to remove the terminal cover, see steps 3 and 4 in

ing wires” on page 20

4

Connect the power cable to the control power supply input (AC INPUT)
terminal on the rear panel.

If you want to use a power cable other than the supplied or optional cable, use a
cable with crimping terminals that match the M4 screws of the AC INPUT terminal.

5

Turn off the switchboard’s circuit breaker.

6

Connect the power cable to the switchboard.

Use crimping terminals that match the size of the screws of the switchboard terminals.

7

Attach the terminal block cover that you removed in step 3.

WARNING

Risk of electric shock.
• This product conforms to IEC Safety Class I (equipment that has a protective con-

ductor terminal). Be sure to earth ground the product to prevent electric shock.

• Connect the protective conductor terminal to earth ground.
• Have a qualified engineer connect the power cable to the switchboard.
• For the connected switchboard, select a circuit breaker that has a cut-off current

that can handle the maximum input current of the product

CAUTION

• If the voltage distortion of the AC power line is large, the product may malfunction.

The product cannot be connected to a generator or the like.

• Use the AC line for the input power supply. Do not supply power from the output of the AC

power supplies that are connected to this product.

• Inside the product, protective circuits are connected to match the input terminal. Connect

the cable correctly.

• The control power cable supplied with the product or an optional heavy PVC jacketed

three-core control power cable (AC5.5-3P3M-M4C) can be used.

See

«
...
40
41
42
43
44
...
»

Содержание DSI1020

































































Отзывы:

Нет отзывов