A
Page 18 / 28
Product Description
RPW301-FTL
Datasheet 1.10-65.020-01-EN
Issue 2017-12-20 from V3.02
Menu level
NOTE
If no settings are made within approx. 5 seconds, the individual setting functions are exited and saved
as required.
Config menu
The following functions are available in the Config menu:
■
Setting vacation mode
■
Setting the time and date
■
Setting the 12/24 hour display
■
Switching the temperature scale °C/°F
■
Setting the initial display
Setting vacation mode
►
Hold down the "Occupancy button" for 5 seconds.
"
ConF
” appears on the display.
►
Release the “Occupancy button”.
►
Briefly press the "Occupancy button" to select the config menu "
ConF
"
or the Info menu "
InFo
".
►
Select the config menu "
ConF
".
►
Hold down the “Occupancy button” for 5 seconds.
►
Release the “Occupancy button”.
The “Set vacation” menu appears in the display.
►
Hold down the “Occupancy button” for 5 seconds.
The value being set flashes.
►
Briefly press the “Occupancy button” to set the duration of the vacation to a
maximum of 31 days.
Briefly pressing the “Occupancy button” increases the current value by +1.
Setting "00d" = 0 days deletes all previous vacation settings.
The setting is accepted after 5 seconds of no entry being made. Vacation mode comes
into effect upon the end of the day at 0.00 hours.
The display switches back to initial display and the "U“ icon appears.
If vacation mode is active, the room control module is in economy mode.
The display also shows the
(house without little man) symbol.
At the end of vacation mode, the comfort mode becomes active at 0.00 for a duration of
6 h.
Delete vacation mode
To abort vacation mode, you must set vacation duration to "00d" = 0 days.
The settings procedure is the same as previously described.
