A
Page 6 / 8
Commissioning
IT554
Datasheet 4.30-50.554-11-EN
NOTE
Update the label on the router.
Resetting the VPN Router
Resetting the VPN router
You cannot reset the router yourself.
►
Send in the router when a reset is necessary.
Connecting the Router On-Site
!
NOTICE
Before connecting the router to the broadband router, check the IP network distributed to this router
via DHCP. Make sure that the IP network does not conflict with any other IP network in this
TechnoWay configuration.
If the IP network conflicts with another IP network, change this DHCP network on the broadband
router to an available subnet.
►
Connect the VPN router according to the following diagrams.
NOTE
Check the connection to the new IP address of the router by entering the IP address in the address
field of the browser.
Connection
1
Internet: The Internet port (WAN connection) is used to connect the Internet connection
(broadband router).
2
1, 2, 3, 4: These Ethernet ports (LAN connection) connect the router with PCs, the BMS
or controllers.
3
Power: The power supply unit is connected to the power supply.
3
2
1
