A
Page 5 / 8
Datasheet 4.65-30.013-11-EN
GLT-D005-TFA4
Commissioning
Issue 2017-03-30
Configuring the printer on the Neutrino BMS
requirement:
Neutrino BMS software version 9.13 or later
You must apply the following settings in the BMS menu "Tools" > "BMS configuration":
►
Open the BMS function group and select “Printer” in the tree.
The “BMS configuration” window appears.
►
In the “Edit” menu, select “New.”
The “Printer configuration” window appears.
Make the following settings in the “Printer configuration” window.
►
Enter the “Name” and “Location” of the printer.
You are free to enter whatever you want. Once installed on the BMS, the printer can be more
easily identified using these specifications.
►
Select the manufacturer “HP” from the list provided.
►
Select the printer type:
►
Under “Type,” select the “OfficeJet Pro K5400 Foomatic/hpijs” printer driver for Neutrino BMS
version 9.13.
►
For Neutrino BMS version 9.26 or higher, two types with the same name, “PostScript Printer
Foomatic/Postscript,” are displayed. Select either one.
►
Select “TCP/IP Raw” as the operating mode and the port number "9100".
►
Enter the IP address of the printer (e.g. 192.168.100.192) in the “Server Name” field.
►
Have your network administrator verify the other entries beforehand.
►
Select the following default settings:
- Paper size: A4
- Paper source: Standard
- Portrait
- Color mode: Color
- Color mixture: QNX dithering
- Resolution: 1200 x 1200 (maximum printer resolution)
- Margins: 1.27 cm (For smaller margins, and for the left and right-hand margin in particular, the
printer may eject a second empty page)
►
Confirm your entries with [OK].
The configuration is then saved.
►
You must restart the system on the BMS to apply the configuration.
You can use the printer as soon as you have restarted the BMS.
