A
Page 10 / 10
Product Description
DS230/4..32 Actuating Drives
Datasheet 3.50-32.020-01-EN
DS230/4..32/E auxiliary switch setting
Setting example
Switch off mains power supply and remove the cover.
Auxiliary switch A - Set to 30° rotational angle:
- Move sliding switch for manual adjustment and set adapter to 30° rotational angle.
- Turn ratchet wheel D1 until microswitch E1 switches.
Auxiliary switch B - Set to 70° rotational angle:
- Move sliding switch for manual adjustment and set adapter to 70° rotational angle.
- Turn ratchet wheel D2, until microswitch E2 switches.
Replace the cover, switch on mains power supply, and perform operational check.
Actual product not shown
(1) Adapter with position indicator
(2) Operating pins with the two micro
switches
(3) Connection terminal for auxiliary
switches
(4) Pressure pin for manual adjustment
Factory setting
Auxiliary switch A: Switches when rotational angle >10°
Auxiliary switch B: Switches when rotational angle >80°
1
2
3
4
DS230/4/E
21
22
23
24
25
26
10°
80°
A
B
DS230/8..32/E
21
22
23
24
25
10° 80°
A
B
