A
Page 7 / 8
Datasheet 1.10-51.111-01-EN
DDC111, DDC111-2
Product Description
Issue 2012-05-09
DDC111 Operation
Displays
Adjusting the room temperature setpoint
The room temperature setpoint for day, night or stand-by mode is automatically specified by the
program. Depending on the configuration, the room temperature setpoint can be manually adjusted
between ± 3 K.
Manual setting adjusts the setpoints for all operating modes to the same extent.
Example: If the current “day” setpoint temperature is increased by 2 K, the “night” and “stand-by”
setpoints will also be increased by 2 K.
■
Press the
button: The room control module switches to “Setpoint setting” temperature mode.
The function symbol
or
or
is displayed, and the decimal place of the current setpoint
setting flashes at the same time.
■
Use the
button to increase or decrease the room temperature setpoint in steps of 0.1 K.
■
Use the
button to switch directly back to the standard display. If no button is pressed, the room
control module automatically switches back to the standard display after 5 seconds. The new room
temperature setpoint is saved.
Switching on day or stand-by mode
The central program automatically switches night and stand-by modes on and off. Day mode is
switched on either by the presence detector or manually using the
button.
Switching on day mode
Day mode can only be switched on manually in night or stand-by modes. When manually switching
from night mode to day mode
the day mode is only switched on for a time period specified by
the program. At the end of this time period,
the room module automatically switches back to night
mode.
Switching on day mode:
■
Press the
button: Function symbol
is displayed. When switching from night mode to day
mode, the duration of the day mode that is switched on is displayed for 5 seconds.
Function symbols depend on operating mode:
Day mode
Night mode
Stand-by mode
Fan levels
Automatic switching via central program or presence detector
LCD display depends on configuration:
■
Room temperature (actual value) with function symbol
■
Room temperature setpoint with function symbol
1
Function symbols
2
LCD display
1
2
