manualshive.com logo in svg

KidKraft Appleton Play System F24148, Инструкция по установке и эксплуатации

Поделиться
Скачать
KidKraft Appleton Play System F24148 Скачать руководство пользователя страница 1

INSTALLATION AND OPERATING INSTRUCTIONS

To reduce the risk of serious injury or death, you must read and 

follow these instructions. Keep and refer to these instructions often 

and give them to any future owner of this play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 22’3” x 28’ area requires Protective Surfacing. See page 3. 
MAXIMUM VERTICAL FALL HEIGHT - 6’ (1.8 m) 
CAPACITY - 6 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks.

Warning. Only for demestic use.

WARNING 

9404148

Rev 04/0

9

/2020

Table of Contents

Warnings and Safe Play Instructions. . . . . . . . . . . . . . . pg. 2
Protective Surfacing Guidelines. . . . . . . . . . . . . . . . . . . pg. 3
Instructions for Proper Maintenance  . . . . . . . . . . . . . . . pg. 4
About Our Wood – Limited Warranty   . . . . . . . . . . . . . . pg. 5
Keys to Assembly Success  . . . . . . . . . . . . . . . . . . . . . . pg. 6
Metric Conversion Sheet  . . . . . . . . . . . . . . . . . . . . . . . . pg. 7
Part ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 8-12
Installation of I.D./Warning Plaque   . . . . . . . . . . . .Final Step

A P P L E T O N   P L AY   S Y S T E M   –   F 2 4 1 4 8

4 - 8 Hrs

Two person

Two person

assembly

assembly

KidKraft, Inc.

4630 Olin Road

Dallas, Texas 75244 USA

[email protected]

[email protected]

1.800.933.0771

972.385.0100

For online parts replacement visit

https://parts.kidkraft.com/

KidKraft Netherlands BV

Olympisch Stadion 8

1076 DE Amsterdam

The Netherlands

[email protected]

+31 20 305 8620 M-F from 09:00 to 17:30

(GMT+1)

For online parts replacement visit

https://parts.kidkraft.eu/

Содержание Appleton Play System F24148









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды