2
Assembly
1. Remove elastic
storage straps.
2. Open Ball Pit
and place face
down.
3. Using a paper clip,
unzip underside of
Ball Pit and insert
Floor Pad.
4. Using a paper clip,
re-zip underside
and turn upright.
1
2
3
4
NOTE: After assembly the Ball Pit may appear distorted due to being packaged.
The Ball Pit will regain it’s natural shape over time.
To help this process, it is recommended to set up and allow 24-48 hours before use.
Where required, manipulating the Ball Pit sides by hand, into the correct shape will also help
this process.
How to care for your kiddicare ball pit
Cleaning
This product has been designed and developed with safety, comfort and functionality in
mind. Please take the
time to read this manual carefully before using this product and keep it in a safe place for
future reference.
Care Instructions
Remove outer cover. Cold machine wash cover on gentle cycle with mild detergent if necessary.
Do not bleach.
Do not tumble dry.
Do not iron.
Do not dry clean. Dry flat in the shade thoroughly before reuse and avoid direct heat and
sunlight.
Maintenance
Always check parts regularly, replace if required. To maintain the safety of your product,
seek prompt repairs for
bent, torn, worn or broken parts.
Use only those parts and accessories approved by CNP Brands. In Australia, contact CNP
Brands on
1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
Distributed in Australia by CNP Brands,
82 Maribyrnong street, Footscray, VIC, 3011
Customer Service 1300 667 137
W: www.cnpbrands.com.au
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000