0086-CPD-535595
1
Thank you for purchasing a Kidde Fyrnetics alarm.
Please read through our guide in full.
Kidde Fyrnetics recommends for maximum protection that both ionisation and photo-elec-
tric (optical) smoke alarms be installed. Ionisation sensing alarms may detect invisible fire
particles (associated with fast flaming fires) sooner than photoelectric alarms.
Photoelectric sensing alarms may detect visible fire particles (associated with slow smoul-
dering fires) sooner than ionisation alarms. Home fires develop in different ways and are
often unpredictable. For maximum protection, Kidde recommends that both Ionisation and
Photoelectric alarms be installed.Heat alarms are useful in areas with condensa-
tion/dust/high humidity, such as kitchens and lofts.
Heat alarms MUST ALWAYS be interconnected to smoke alarms.
230V Interconnectable Mains Operated Alarms For models:
1SFW, 1SFWR, 2SFW, 2SFWR,
3SFW and 3SFWR
The additional Owner’s Manual should be left in a safe place
for the property owner. e.g. near Consumer Unit.
Kidde Safety Europe, Mathisen Way, Colnbrook, SL3 0HB, UK.
www.kiddefyrnetics.co.uk
© Kidde Fyrnetics 2008
Electrical rating 230V AC, 50Hz 80mA
max per alarm (maximum 80mA for
originating unit with 24 Devices inter-
connected).These alarms may be used
with the Kidde Wireless base accesso-
ry, enabling interconnection between
alarms, wirelessly. The Remote, Test &
Hush accessory will also work with
alarms on Wireless bases.
®
1385-7206-00
Contents
Section
1.
Installation Instructions – Introduction
. . . . . . . . . . . . . . . . . . . . . . . . .2
Section
2.
Recommended Locations for Smoke/Heat Alarms
. . . . . . . . . . . . .2
Section
3.
Locations to be Avoided (Smoke Alarms)
. . . . . . . . . . . . . . . . . . . . . .4
Section
4.
Installing Alarm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Section
5.
Loose Battery Models
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Section
6.
Initial Testing and Checking of Alarm
. . . . . . . . . . . . . . . . . . . . . . . . . .6
Section
7.
Interconnecting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Section
8.
Timing of Installation/Decorating
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Section
9.
Decorating
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Section 10.
L.E.D. Status
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Section 11.
Ongoing Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Section 12.
Battery Replacement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Section 13.
Repair/Servicing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Section 14.
Limitations of Smoke/Heat Alarms
. . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Section 15.
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Section 16.
Service and Guarantee for Smoke/Heat Alarms
. . . . . . . . . . . . . . .10
Smoke and Heat alarm
Installer’s Guide
COMPATIBLE
*Applicable to 1SF & 2SF Series +Applicable to 3SF Series
BS 5446: Pt. 2: 2003
Lic No: KM503753
+
EN14604: 2005
Licence No. KM524754
*
1385-7206-00_R3_V9:- 2011.3.14 5:28 PM Page 1