Kidde Fire Systems PEGAsys, Инструкция по установке, эксплуатации и обслуживанию

Страница: 21 / 156

1-5 August 1999
Intelligent Suppression Control/Fire Alarm System
PEGAsys
76-100016-001
1-2.9.2 SmartOne PHOTOELECTRIC DETECTORS
The SmartOne Photoelectric smoke detectors provide true dis-
tributed-intelligence, addressable microprocessor-based smoke
detection to the
PEGAsys system.
1-2.9.3 SmartOne HEAT DETECTORS
The SmartOne Thermistor heat detectors provide true distrib-
uted-intelligence, addressable, microprocessor-based heat de-
tection to the
PEGAsys system.
1-2.10 SmartOne Detector Bases
The SmartOne series of detection devices all use universal
mounting bases which are available in three styles. The 4SB is
a European-Style 4-inch base whose outside diameter matches
that of the low profile SmartOne detectors, which when com-
bined, provides a very attractive unit. The 4SB, shown in Figure
1-14, mounts to standard 3, 3.5-inch, or 100-mm electrical boxes
with ease.
Figure 1-14. Four-inch Detector Base
The 6SB model, shown above, is a traditional style detector
base with an integral trim ring which provides coverage for any
inconsistencies between the electrical box and ceiling material.
The 6SB mounts to standard 3, 3.5 and 4 inch electrical boxes
with ease.
Figure 1-15. 6-inch Detector Base
1-2.11 Addressable Contact Input Devices
The SmartOne Contact Monitor (P/N 70-407008-00X) allows
an installer the ability to interface typical NO/NC fire alarm de-
vices, such as water flow and tamper switches to the
PEGAsys
system. The contact monitor is also used to interface to the
manual alarm, manual release and abort stations.
Figure 1-16. Addressable Contact Input Device
1-2.12 Addressable Relay Output Devices
The addressable relay output device (P/N 70-408004-001) pro-
vides the
PEGAsys system with a Form-C dry-contact interface
for remote control applications.
Figure 1-17. Addressable Relay Output Device
1-2.13 Model DH-2000 Air Duct Housing
The DH-2000 air duct housing is designed for detecting par-
ticles of combustion products in air-handling systems.
Figure 1-18. Air Duct Housing