4
ROMEX NM CABLE INSTALL (OPEN BACK MIRRORS):
Romex Supply
Wire
Wire Compression
Fitting
Fixture’s
Electrical
Box
Romex Supply Wire
Fixtures Electrical Box
Electrical Box Cover
Wire
Terminal Block
MOUNTING:
•Use provided paper template to locate the desired mounting location for the mirror and to
mark the locations required for the wall anchors.
•Use a 15/64 inch drill bit to drill pilot holes at the locations marked in step 1 and insert the
wall anchors.
•Pass the screws through oval holes in the mounting brackets and screw into the wall anchors.
NOTE:
Brackets should have the angled end facing up.
•Hang brackets on back of mirror onto the screws of mounting brackets that are attached to
the wall.
INCH DRILL
BIT (NOT
SUPPLIED)
5/16
WALL
ANCHOR
WOOD
SCREW
PHILLIPS
SCREWDRIVER
(NOT SUPPLIED)
MOUNTING
BRACKET
ANCHOR
