Kia PICANTO 2023, Руководство пользователя, Страница: 415 / 570

25
7
7
What to do in an emergency If you have a flat tyre (with tyre mobility kit)
WARNING
Do not let the compressor run for more
than 10 minutes, otherwise the device
will overheat and may be damaged.
僅 To reduce the inflation pressure:
Press the button (9) on the com
-
pressor.
CAUTION
If the inflation pressure is not main
-
tained, drive the vehicle a second time,
refer to Distributing the sealant. Then
repeat steps 1 to 4.
Use of the TMK may be ineffectual for
tyre damage larger than approximately
4 mm (0.16 in).
Contact a professional workshop if the
tyre cannot be made roadworthy with
the Tyre Mobility Kit. Kia recommends to
visit an authorised Kia dealer/service
partner.
WARNING
The tyre inflation pressure must be at
least 230 kPa (33 psi). If it is not, do not
continue driving. Call for road side ser
-
vice or towing.
Notes on the safe use of the tyre
Mobility Kit
僅 Park your car at the side of the road
so that you can work with the TMK
away from moving traffic. Place your
warning triangle in a prominent place
to make passing vehicles aware of
your location.
僅 To be sure your vehicle will not move,
even when you're on fairly level
ground, always set your parking
brake.
僅 Only use the TMK for sealing/inflation
passenger car tyres. Do not use on
motorcycles, bicycles or any other
type of tyres.
僅 Do not remove any foreign objects
-
such as nails or screws -that have
penetrated the tyre.
僅 Before using the TMK, read the pre
-
cautionary advice printed on the seal
-
ant bottle!
僅 Provided the car is outdoors, leave the
engine running. Otherwise operating
the compressor may eventually drain
the car battery.
僅 Never leave the TMK unattended
whilst it is being used.
僅 Do not leave the compressor running
for more than 10 min. at a time or it
may overheat.
僅 Do not use the TMK if the ambient
temperature is below -30°C (-22°F).
僅 When the tyre and wheel are dam
-
aged, do not use Tyre Mobility Kit for
your safety.
Technical Data
Technical Data
System Voltage DC 12 V
Operating Voltage DC 10 – 15 V
Operating Current MAX. 10 ± 1 A
Suitable for use at temperatures - 30 ~ + 70 °C (- 22 ~ + 158 °F)