Kia Niro Hybrid, Руководство пользователя, Страница: 567 / 646

WARNING
n Halogen bulbs
• Halogen bulbs contain pressurized
gas that will produce flying pieces
of glass if broken.
• Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact
with liquids. Never touch the glass
with bare hands. Residual oil may
cause the bulb to overheat and
burst when lit.
A bulb should be operated only
when installed in a headlight.
• If a bulb becomes damaged or
cracked, replace it immediately
and carefully dispose of it.
• Wear eye protection when chang‐
ing a bulb. Allow the bulb to cool
down before handling it.
Front turn signal lamp bulb
replacement
1. Open the hood.
2. Remove the dust cover (A) ýrom
the headlamp assembly then bulb-
socket by turninþ the counterclock‐
wise until the tabs on the bulb-
socket aliþn with the slots on the
headlamp assembly.
3. Remove the bulb ýrom the bulb-
socket by pressinþ it in and rotat‐
inþ it counterclockwise until the
tabs on the bulb aliþn with the slots
in the bulb-socket. Pull the bulb out
oý the bulb-socket.
4. Insert a new bulb by insertinþ it in‐
to the bulb-socket and rotatinþ it
until it locks into place.
5. Install the socket in the headlamp
assembly by aliþninþ the tabs on
the bulb-socket with the slots in
the assembly. Push the bulb-sock‐
et into the headlamp assembly and
turn the socket clockwise.
Fog lamp/DRL bulb replacement
Iý the ýront ýoþ lamp (Bulb) and DRL
bulb (LED) does not operate, have your
vehicle checked by a proýessional work‐
shop. Kia recommends to visit an au‐
thorized Kia dealer/service partner.
9-87
9
Maintenance