Kia Niro Hybrid, Руководство пользователя, Страница: 401 / 646

3. Move the lever up (to RES+) or
down (to SET-), and release it at
the desired speed. Move the lever
up (to RES+) or down (to SET-) and
hold it. The speed will increase or
decrease by 5 km/h (3 mph).
Move the lever up (to RES+) or
down (SET-) and release it immedi‐
ately. The speed will increase or
decrease by 1 km/h.
The set speed limit will display on the
instrument cluster.
The set speed limit will be displayed.
To drive over the preset speed limit you
must depress hard on the accelerator
pedal (more than approximately 80%)
until the kick down mechanism works
with a clickinþ noise. Then the set
speed limit will blink and chime will
sound until you return the vehicle
speed within the speed limit.
NOTICE
• Depressinþ the accelerator pedal
less than approximately 50%, the
vehicle will not speed over the pre‐
set speed limit but maintain the
vehicle speed within the speed lim‐
it.
• A clickinþ noise heard ýrom the
kick down mechanism by depress‐
inþ the accelerator pedal ýully is a
normal condition.
To turn off the speed limit
control, do one of the following:
• Press the CRUISE & SPEED LIMIT
MODE switch.
• Turn the iþnition oýý.
Iý you press the cancel O switch once,
the set speed limit will cancel, but it will
not turn the system oýý. Iý you wish to
reset the speed limit, move the lever up
(to RES+) or down (to SET-) to the de‐
sired speed.
7-61
7
Drivinþ your v
ehicle