GENERAL INFORMATION
GI-3
WELDING PROCEDURES
Observe the following tips when welding.
1.
Wear appropriate eye protection.
2.
Carefully follow the manufacturers operating
instructions for the welding machine you are using.
3.
Do not weld, smoke or allow open flames around
volatile chemicals, cleaners or solvents or in any area
where they have just been used.
BODY FRAME STRAIGHTENER
When using a frame straightener, do not enter the area
where the body is being straightened by the chain.
ELECTRICAL PROCEDURES
1.
Disconnect the negative battery terminal.
2.
Do not pull on wires when disconnecting electrical
connectors. Be careful to hold the connector itself when
disconnecting it.
3.
Insert the connector until it "licks" when connecting
the connector.
4.
Handle all electrical components with care.
BVQGI6004
mashinesoft.com
09120146259