Kia K 900, Руководство по функциям и возможностям, Страница: 28 / 66

STEERING WHEEL CONTROLS
26
CRUISE
CANCEL
RES
OK
SET
SMART CRUISE
CONTROL WITH
STOP & GO VIDEO
To view a video on your
mobile device, snap
this QR Code or visit the
listed website. Refer
to page 2 for more
information.
A
B
C F
Smart Cruise Control (SCC) with Stop & Go
†6
Quick Tips
§
The speed setting for SCC can be adjusted under
the following conditions:
§
With no vehicle in front, you must be traveling
at a minimum speed of 20 mph
§
When following a vehicle, there is no minimum
speed requirement
§
When following a vehicle, the system can
automatically adjust your cruise speed based on
the vehicle detected in front. It will even bring
the vehicle to a complete stop if necessary. If the
vehicle remains at a standstill for more than 3
seconds, you must depress the accelerator pedal
or press the RES+/SET- button up/down to start
the vehicle.
§
To change the cruise control mode from SCC to
standard cruise control, press and hold button C .
Repeat to switch back to SCC mode. (The SCC
system must not be activated to change modes).
REMINDERS:
§ CRUISE indicator must be ON in order to operate SCC
§ The cruise control system will not activate until the brake
pedal has been depressed at least once after the ignition is ON
or engine starting
§
For the SCC system to operate, you must be traveling at a
minimum speed of 20 mph, when no vehicle is in front
§ The SCC system remains ON when ignition is cycled. The
speed setting will need to be reset when ignition is cycled
§ The distance settings are approximations and may vary
depending on vehicle speed. See the owner’s manual for
more information
§ SCC is also canceled when the driver’s door is opened, gear shift
is changed out of D (Drive), EPB is activated and various other
conditions. See owner’s manual for other conditions
§ If the SCC system is left on, it can be activated inadvertently.
Keep the system off when not in use to avoid setting a speed
which the driver is not aware of
§ The SCC system is a supplemental system and is not a substitute
for safe driving. It is the responsibility of the driver to always
check the speed and distance to the vehicle ahead
The Smart Cruise Control (SCC) with Stop & Go system is
designed to maintain a predetermined distance from vehicles
detected ahead by automatically adjusting the driving speed
as needed.
To set/adjust the SCC speed:
§
Press the CRUISE button A to turn the system ON. The
CRUISE indicator will illuminate on the instrument cluster
§ Accelerate/decelerate to the desired speed
§
Press the SET - button B down to set the speed. Press
the RES+/SET- button B up/down to increase/decrease
the set speed
To set the vehicle-to-vehicle distance:
§ Press the SCC button C on the steering wheel
§
Each time you press C the vehicle-to-vehicle distance
will change D , indicated by the number of bars that
appear on the display E
To cancel SCC operation:
Press the CANCEL button F
or press the brake pedal. The LCD screen will display a
message that the SCC operation is canceled.
To turn SCC system OFF: Press the CRUISE button A .
The CRUISE indicator on the instrument cluster will turn OFF.
CRUISE
60
MPH
(Distances are
approximate and
vary depending on
vehicle speed)
(Display on
LCD screen)
172ft 130ft
82ft
106ft
D
E
www.youtube.com/KiaFeatureVideos
†LEGAL DISCLAIMERS ON BACK INSIDE COVER