Kia 2019 niro, Руководство пользователя, Страница: 500 / 551

Maintenance
58 8
Light bulbs
A skilled technician should check or
repair the head lamp (LED), for it
may damage related parts of the
vehicle.
Replacing headlamp (high/low
beam) bulb
1. Open the hood.
2. Remove the headlamp bulb cover
by turning it counterclockwise.
3. Disconnect the headlamp bulb
socket-connector.
4. Remove the bulb-socket from the
headlamp assembly by turning
the bulb-socket counterclockwise
until the tabs on the bulb-socket
align with the slots on the head
-
lamp assembly.
5. Install a new bulb-socket assem
-
bly in the headlamp assembly by
aligning the tabs on the bulb-
socket with the slots in the head
-
lamp assembly.
6. Push the bulb-socket into the
headlamp assembly and turn the
bulb-socket clockwise.
7. Install the headlamp bulb cover by
turning it clockwise.
Headlamp bulb
WARNING
Halogen bulbs
Handle halogen bulbs with care.
䳜 Halogen bulbs contain pressurized
gas that will produce flying pieces
of glass if broken.
䳜 Avoid scratches and abrasions to
the halogen bulbs. If the bulbs are
lit, avoid contact with liquids.
䳜 Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact
with liquids. Never touch the glass
with bare hands. Residual oil may
cause the bulb to overheat and
burst when lit. A bulb should be
operated only when installed in a
headlamp.
䳜 If a bulb becomes damaged or
cracked, replace it immediately
and carefully dispose of it.
䳜 Wear eye protection when chang
-
ing a bulb. Allow the bulb to cool
down before handling it.
ODEEV098054NR
ODEEV098055NR