background image

Assemble units as described herein only. To do otherwise 
may result in instability. All screws, nuts and bolts must be  
tightened securely and must be checked periodically after  
assembly. Failure to assemble properly, or to secure parts 
may result in assembly failure and personal injury.

Assembly Instructions

CaféWay

  

Tables 

Models ECELP, ECOCP & ECRDP

July 2018

Note: 

This instruction contains 

installation steps for stool seats 

(Pages 1-2), bench seats (Page 3), 

and middle bench seats (Page 4). 

Stool Seat Installation

1. Stools that will be installed near the 

pivot point of the table are required 

to use all eight mounting locations. 

Stools located away from the pivot 

location are only required to use 

the four outer corner mounting 

locations (Figure 1). 

Note:

 Enough screws are supplied 

to use all eight mounting locations 

on each stool if desired.

2. Remove stools and #14 x 

5

/

8

” 

attachment screws from the 

shipping box. Place stool seats 

upside down on a flat protective 

surface.

3. Align three screws, two in each 

adjoining corner, and one in 

between the corners as illustrated 

(Figure 2).

4. Install the three #14 x 

5

/

8

” screws, 

but do not drive the screws in all 

the way. Leave a 

1

/

4

” gap between 

the bottom of the screw head and 

stool. This will allow the stool plate 

adapter to slide in between the 

screw head and seat (Detail A). 

Отзывы: