background image

10

III. NOTICE - READ BEFORE USE

L. Wheelchair Stability (Continued)

WARNING:  If the wheelchair is equipped with a system to vary the tilt angle of the seat 
frame, confirm it is stable throughout the range of angle changes before use. If the 
wheelchair is not stable throughout the range of tilt angles a fall or tip over is imminent. 
Falling or tipping over could result in damage to your wheelchair, serious injury or death.

Strategies to minimize the risk of falling:

• Ensure anti-tips are in the correct position (Reference Section N for proper use of anti-tips).
• Lean forward when pushing up an incline.
• Lean back when pushing down a decline.
• Have an attendant behind you to provide assistance.
• Wheelchair set up should be done only by an authorized technician.
• Always use the accessories provided.
• Your wheelchair should be adjusted by an authorized technician when there are changes in 

your weight or how you sit.

• Always use anti-tips where appropriate (Reference Section for proper use of anti-tips).

To ensure proper stability of your wheelchair, you must make sure the center of gravity and the 
wheelchair’s base of support is correct for your balance and abilities. Many factors can affect 
these two elements:

There are additional actions that can have adverse effects on the stability of your wheelchair. You 
should consult with an assistive technology professional or clinical professional that is familiar 
with your needs and capabilities to determine what you are able to do safely while maintaining 
the stability of your wheelchair.

M. Aftermarket Seating

WARNING:  The installation of a cushion on a wheelchair could affect the center of gravity 
of the wheelchair. Changes in your center of gravity may affect your stability in your 
wheelchair, resulting in tipping over or falling from your wheelchair which may result in 
serious injury. Always review the instructions for use of your wheelchair to see if changes 
to the wheelchair may be needed to provide sufficient stability after adding a cushion.

The integrity of your skin can be affected by many aspects of your daily life and 
medical condition, including the use of this product. Be sure to follow any skin care 
regimens established by your clinician. Consumers of this product should make 
sure their skin is inspected routinely for changes as directed by their clinician. 
Failure to do so could result in serious injury or death.

Selecting the Proper Seating Product

You should consult with a licensed clinician (i.e. Physician or therapist) trained in wheelchair seating 
and positioning before selecting any seating and positioning product. This will help ensure you 
receive the right product for your specific needs.

Seat height

Size and position of rear wheels                

Size and position of front casters

Seating system components

Seat depth

Back angle

Seat angle

Tilt position (If applicable)

Содержание Little Wawe Arc TTl






















































Отзывы: