19
Height Adjustable T-Arm
1. Remove two screws (B) and outside cross tube bracket (A) using a 5mm Allen wrench.
2. Install the T-Arm mount (E), receiver (C) and bracket (B) onto the frame and cross tube with four screws
(A & D) using a 5mm Allen wrench.
3. Install the T-Arm assembly into the receiver. Ensure the latch (B) "clicks" into place. Adjust the height by
loosening the height lever (A) and sliding the T-Arm post up or down. Repeat steps on opposite side.
A
B
A
B
C
D
E
A
B
