Menu related to the functionalities of the standard IEEE 802.15.4 network.
It is possible to open the network for the entry of new devices, as long as they are looking
for one to connect. When you click on the "Open Network" button, the network will be open for 254
seconds, which can be monitored through a countdown timer and its status indicator.
It is possible to remotely update the firmware of the devices connected to the network using the
following steps:
1.
Clicking on the "Search Files ..." button, search for the file in the ".ota" format with the
firmware update of the routers or the file with the update of the end devices.
2.
Click on the "Import" button.
3.
The IEEE 802.15.4 network should update devices automatically.
The file in the ".ota" format will be available by Khomp as soon as there is a new firmware
version.
Attention
For the update procedure to take place correctly, check the following indications before
starting the update:
●
The connected Endpoints must be powered by USB and / or new batteries.
●
Low battery endpoints can fail to update and corrupt your internal memory.
●
The update process takes time depending on the number of devices
associated with it.
4.1.4
IEEE 802.15.4 network
4.1.4.1
IEEE 802.15.4 network hub
4.1.4.2
Update IEEE 802.15.4 devices
Allows you to choose the policy for sending data from the ITG 200 to the cloud. The
options are:
1.
Automatic. The gateway will preferably send via the ethernet network, using the modem as
a fallback, if available.
2.
Ethernet. Exclusive shipping via ethernet cable.
3.
Modem. Exclusive sending by modem.
4.1.3.5
Send by interface
18
Upon entering the network, messages
sent to the gateway will be displayed on the Panel
automatically and the device can be seen in the
Device List in the Devices menu.
The network can be closed at any time by
pressing "Close Network".
Once the "Open Network" button is
pressed, the ITG 200 will create an IEEE 802.15.4
network using the channel with the best signal
quality.
The IEEE 802.15.4 network MAC is also
shown for identification purposes by the MQTT API.
Содержание ITG 200Indoor
Страница 1: ...User Manual ITG 200 Indoor...