KHIND SE1800, Инструкция по эксплуатации

Страница: 3 / 16

Parts Identification
1. Always switch off the appliance, unplug from the mains and let the appliance cool down when the
appliance is not in use or before cleaning or before putting on or taking off parts.
2. Use a damp cloth to scrub the main water tank, and do not wash it in water to avoid malfunction
and electric shock.
3. Do not immerse the appliance outer body, plug and power cord into the water or other liquids.
4. Place all parts in a dry place after drying.
5. Before each steaming, replace with clean water. Always use clean tap water for steaming.
6. After using the steamer several times, there will be scale deposits on the surface of the bottom
heating element, which is a normal phenomenon. The amount of scale depends on the hardness of
the water. It is recommended to remove the limescale regularly to avoid heating obstruction and to
prolong the service life of the steamer.
7. White vinegar can be used to clean limescale: Add water to the middle of the water level line, pour
about 50ml of white vinegar (note: do not use other chemicals and descaling agents), cover the drip
pan to avoid splashing water; Plug in the power supply and set the timer for 5-10 minutes. When the
time is over, unplug it and pour the vinegar out after it cooled down completely. Wipe the inner
surface of the water tank with a damp cloth, and rinse with clean water repeatedly.
8. Do not use wire brush or hard brush to clean, it may scratch surfaces.
9. Do not use abrasive cleaner like thinner or solvent to clean the appliance.
3 2
1
2
3
4
5
6
7
Lid
Upper Steamer Compartment (11 Litres)
Support
Lower Steamer compartment (11 Litres)
Drip Tray
Steam Generator
Main Water Tank
Safety Precaution Information
Cleaning & Maintenance
24. WARNING! Misuse of this appliance may cause injury.
25. Before using, please make sure all accessories and packing must be removed.