Fault conditions
There are three fault conditions that can occur. The amplifier will show you this
in 3 different colours of the indicator light.
When an error occurs the amplifier will stay locked in error detected mode and
the amplifier must be reset using button A. There is a time delay on this switch to
prevent switching the amplifier on/off too fast.
When the indicator light turns red, the maximum current limit is crossed.
The reason for this can be a short circuit or just playing to loud.
When the indicator light turns purple a DC-current is detected and the amplifier
turns off to protect the loudspeaker that is connected.
When the indicator light turns white, the main power is lost or below the
necessary voltage for a short period of time.
Panic button
Button A on the left can always be used as a panic button. In case of emergency
simply press button A and the amplifier will turn off completely.
Operating Summery
Indicator light
Colour
Indication
Off
Power switched off
Yellow
Stand by mode
Blue
Operating mode
Green
Mute mode
Red
Maximum current limit is crossed, please turn off the amplifier
Purple
DC-current detected, please turn off the amplifier
White
Main power too low
Buttons
Amp status
Button Action
Off
A
Touch
Turn amplifier on, set to stand
by mode
On
A
Touch
Turn amplifier off
Stand by
B
Hold down for less
then 1 second
Set amplifier in operating mode
Operating
B
Hold down until
indicator light turns
yellow
Set amplifier in stand by mode
Operating
B
Hold down for less
then one second
Turn on mute mode
Mute mode
B
Hold down for less
then one second
Turn off mute mode
