0208 681 0097
6
Operating & Maintenance
SEM & SE200ES Pressurisation
Set
5). Storage & Handling:
➢
The SE200ES pressurisation set is packaged in a dedicated cardboard base, surround and
top. (this is to remain in place until ready for install).
➢
The product must be stored in a covered and dry location, free from dirt, heat and vibrations.
➢
The product must be stored at an ambient temperature between: 5
c to 40
c.
➢
Do not place heavy weights on packaged products as this may cause damage.
If the equipment is to be stored for any length of time all liquids within the pumps & tank
should be drained.
6). Operating Limits:
FLUID TEMPERATURE
-10
C to +80
C
AMBIENT TEMPERATURE
+5
C to +40
C
OPERATING PRESSURE
10 bar (Max)
PROTECTION CLASS
IP55
INSULATION CLASS
F
Noise emissions:
Assembled units weigh >38.5kgs.
Failure to properly lift & support these sets can result in serious personal
injury and/or equipment damage. The appropriate rated lifting devices and
methods must be used for & during lifting operations.
<70 dB(A)
Exposure to excessive noise can cause permanent hearing damage.
It is the end users’ responsibility to identify the required legal
requirements, ensuring the appropriate safety equipment (PPE) is
applied and noise control is in place.
