0208 681 0097
11
Operating & Maintenance
SEM & SE200ES Pressurisation
Set
9). Commissioning
If the pumping equipment is not installed, operated and maintained correctly it can lead to failure,
void warranty and cost time and money.
The commissioning of the set assures all systems and components of the equipment supplied are
installed, tested, operated and maintained according to the operational requirements of the system.
The commissioning process comprises of a set of engineering philosophies and procedures that
inspect and test every operational component of the equipment, from individual functions such as
instrumentation and control logic, through to the full operation of the system.
The main objective of commissioning is to provide the safe and orderly handover of the unit to the
customer, guaranteeing its operability in terms of performance, reliability and safety.
We recommend the unit is commissioned and subsequently
serviced biannually by a fully trained KGN Pillinger engineer.
