0208 681 0097
4
Operating & Maintenance
Dry Well Submersible Pump Set
3). Overview:
KGN Pillinger
’s range of dry well pump sets consists of a skid mounted stainless steel holding tank
with all the necessary ports for the connection of inlet, outlet and air vents, horizontally mounted
electric submersible pumps, values, pipework and controls.
These units are supplied complete with an electrical control panel, which should be mounted within
relative proximity to the pump set. When the level in the tank reaches start level 1, One pump will
operate. If the level rises to level 2 the second pump will operate until the level drops.
The pump sets are designed and manufactured to automatically collect the product and transfer it,
via the pumps, under the dictates of float switches or level electrodes fitted within the Stainless steel
holding tank.
The installer/operator is responsible for following the instructions and complying with the safety
requirements given in this operation manual.
Failures to install, operate, or maintain the equipment according to the ‘Operating & Maintenance
Instructions’ could invalidate the warranty as provided by KGN Pillinger.
No liability can be accepted for damage or operation disorders that are the result of non-compliance
with the operating instructions.
