„Installation and operation manual for fireplace insert”
KFDECOENG1.1562012
25
4 List of materials recommended for construction of the
fireplace.
•
Floor under and in front of the fireplace:
- concrete,
- terracotta,
- stoneware,
- natural stone.
•
Foundation under the insert:
- brick,
- concrete blocks,
- aerated co brick,
- steel profiles.
•
Bottom part of insert enclosure:
- natural stone,
- conglomerate,
- brick,
- ceramic tiles,
- aerated concrete,
- structural plasterwork,
- gypsum board,
- gypsum finishing coat,
- fire resistant mineral wool with Alu foil (FIREROCK).
•
Upper part of the enclosure (hood)
- natural stone, brick (stone beam),
- wood
– e.g. oak (wooden beam),
- sheet brass (wooden beam shield),
- steel profiles
– 30 x 28,
- fire resistant gypsum board,
- fire resistant mineral wool with Alu foil,
- self-adhesive Alu tape,
- Alu-flex
Ø 100, 125 or Ø 160 pipes – degreased,
- structural plasterwork,
- gypsum finishing coat,
- outlet grates (without closable blinds).
•
Connection of the insert to the chimney:
-
“Spiro” Inox chimney pipe (technical approval),
- steel chimney pipe (wall thickness 2 mm
– technical approval),
- Inox band clips,
- chamotte clay,
- heat resistant cement,
- heat resistant silicon
(1200° C).
- high temperature sealing cord.
