BEFORE STARTING:
• Verify proper system set up from SF 600i-L Quick Start Guide at www.keystonerv.com
• Is the 12 Volt Battery Disconnect for the unit turned on? Found near entry door on interior wall or in
exterior front storage compartments.
• Is the solar panel, clean, in direct sunlight, free from obstructions/debris?
»
Clean with water and a cloth/sponge
THE VICTRON APP DOES NOT RESPOND ON MY SMART DEVICE:
• Bluetooth is off
»
Turn on Bluetooth, close and restart app
• Outside Bluetooth range of the solar controller
»
Move within a few feet of the solar controller
I AM UNABLE TO SELECT THE CONTROLLER OR THE
SHUNT
FROM THE DEVICE LIST ON MY SMART DEVICE
(NOT ACTIVE OR HIGHLIGHTED):
Another device is already connected to the APP and only one device can
be connected at a time
APP INDICATES AN UPDATE TO FIRMWARE IS NEEDED:
• Allow the update
SMART SOLAR WATTS, VOLTAGE AND CURRENT ALL
READ “0” ON THE VICTRON CONNECT APP:
• No power to Charge controller (found in front compartment or pass through)
»
Verify the 10 gauge (+) and (–) wires from the solar panel are tight and properly connected to the
(+) and (–) connections labeled “PV”
• Solar Panel not connected to the roof port
»
Connect the Solar Panel to the roof port
In partnership with
SOLARFLEX 600i-L BASIC
TROUBLESHOOTING GUIDE
VICTRON CONNECT APP
USER MANUAL
IF BATTERY VOLTAGE READS
“0” VOLTS, CHECK FOR POOR
CONNECTION TO BATTERY.
