AIR CONDITIONER FEATURES
Displays
O
O
Shows the set temperature in
"
C
"
or
"
F
"
and the
Auto-timer settings.While on Fan only mode,it shows
the room temperature.
DISPLAYS:
-
Evaporator temperature sensor error-Unplug the
unit and plug it back in.If error repeats, call for
service.
NOTE:
"
"
is displayed as shown in the left picture.
HS -
Electric heating sensor error-Unplug the unit and
plug it back in.If error repeats, call for service.
Error codes:
AS-
Room temperature sensor error-Unplug the unit
and plug it back in.If error repeats, call for service.
NOTE:In Fan only mode,it will display
"
LO
"
or
"
HI
"
.
If the unit breaks off unexpectedly due to the power
cut, it will restart with the previous function setting
automatically when the power resumes.
DISPLAYS:
NOTE:
Air Directional Louvers
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure,
here are more features in your control that you should
become familiar with.
The Cool circuit has an automatic 3 minute time
delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and
possible circuit breaker tripping.The fan will
continue to run during this time.
The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius. To convert
from one to the other, press and hold the Left and
Right Temp/Timer buttons at the same time, for 3
seconds.
12
Air Directional Louvers
Air Direction(4- way)
The 4-way air directional louvers allow you to
direct the air flow Up or Down(on some models)
and Left or Right throughout the room as needed.
To adjust the air directional louvers side-to -side,
use the center handles as you move it side-to-side.
Air Filter Cleaning
CARE AND CLEANING
Air Filter Cleaning
。
。
Note:
Never use hot water over 40 C(104 F) to cl ean th e
a
i r fil ter. Never attempt to operate the unit without the air
filter.
Open the front panel.
Take the filter by the center and pull up and out.
Wash the filter u
sing l iquid d ishwashing d etergent a nd w
arm
water. Rinse filter thoroughly. Gently shake excess water
from the filter. Be sure the filter is thoroughly dry before
replacing. Or, instead of washing you may vacuum the filter
clean.
CAUTION
Clean your air conditioner occasionally to keep it looking
new.
Be sure to unplug the unit before cleaning to
prevent chock or fire hazards.
The air filter should be checked at least once a month to see
if cleaning is necessary. Trapped particles in the filter can
build up and cause an accumulation of frost on the cooling
coils.
