1. Put the motor shaft upward, then unscrew fixing ring by turning anticlockwise.
(Refer to the drawing at below)
Holding the base firmly, then pull the base.
CAUTION:
If the motor shaft is facing downward, the fan will become unstable and may
damage the product or floor.
When putting the motor shaft down, the fan is unstable. May cause machine
failure and damage to floor.
2. Hold the stand firmly and gently lift and remove the base.
Technical Specifications
Voltage
120V~60Hz
Power Consumption
?A or ?W
Fan Speed
STOP/ LOW - MID - HIGT
Timer
0 -0.5-1.0-1.5-2.0-2.5-3.0 Hour
P9-14606
