CAUTION:
Do not insert the plug into the power point before assembly is complete.
(May cause electric shock or injury)
Do not press height adjustment button while fan and fan guard are
detached.
(The motor section (slide pipe) may jump out of stand, causing injury)
1. Fix the stand onto the base
●
Remove the motor shaft cover.
●
Check the stand direction by the
indication of front and back of
the base and stand, insert the front
protusions of stand into the concav
-es of the base, then push the
whole stand part down onto the
base until it is fitted in firmly.
●
Placing the motor shaft upward,
then fix the stand and base by
turning the base fixing ring
provided clockwise.
Attention:
●
Base fixing ring is temporarily attached on bottom of stand. Unscrew it
When you assemble the fan.
●
Do not forcibly push the stand down onto the base. May cause damage.
●
Do not put the stand onto the base in wrong direction. May cause damage.
●
Do not press the height adjust button while assembling. May cause injury,
damage to the product or machine failure.
2. Fix Rear Guard and Fan Blade
●
Couple protrusions (three) on the motor section to concaves (three) on the
rear guard.
●
Fix them firmly by turning the guard fixing ring toward [fasten].
●
Couple the pin on the motor shaft and the concave on the fan blade and
insert the fan part into the motor part. Then pressing the fan part towards
the motor part and turn the fan blade cap toward [fasten] to fix them firmly.
Attention:
●
If the fan blade cap is not fastened firmly enough, fan blade may come off,
causing injury.
●
Be careful not to be injured by motor shaft or pin when assembling or
disassembling.
3. Fix Front Guard
●
Hold the rear guard and press the front guard
toward the rear guard from the top, making sure
that the whole periphery of the front guard clicks
into the rear guard.
●
Clip the front and rear guard together
with the clip on the guard.
Attention:
●
If the front guard is not clipped together
firmly enough, the front guard may come off, causing injury.
How to Take off Front Guard
Unplug first and stop the ratation of the fan blade. Then undo the clip and pull the
grip on the guard ring, pressing the front guard down.
Attention:
Do not pull by the clip. May damage the clip.
P5-14606
P6-14606
