Grasp plug and remove from the receptacle or other outlet device. Do not unplug
by pulling on cord. Open fuse cover (A.) by sliding access cover on top of
attachment plug towards blades. Remove fuse carefully (B.) by gently prying out
the ends of the fuse from the receptacle.
Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
Install replacement fuse (C.) by first placing the end of the fuse into the fuse
receptacle which is opposite of the blades of the plug, then carefully push in the
other end. Only push against the metal end of the fuse, not the glass center
portion. Close the fuse access cover (D.) by sliding the cover back into the plug
until it is completely closed, latches and is flush with the face of the plug.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse , AFCI,
LCDI) that should not be removed. Discard product if the attachment plug is
damaged.
Know Your Fan
Parts and Their Function
Parts Function
●
Height adjust button
Use only when higher position required.
Pressing the height adjust button, pull
the slide pipe upwards.
When lower position required, just push
the slide pipe downwards.
You can adjust the height in 2 steps.
Caution:
Be careful not to pinch fingers.
●
Swivel button
Press down…Swivel starts
Pull up…Swivel stops
How to Assemble
P4-14606
P3-14606
P4-14606
