Keystone KSTAP12QD, Инструкция по эксплуатации

Страница: 11 / 19

Operation
Sleep(Eco)/Filter button
Used to initiate the SLEEP/ECO
operation.
NOTE: After 250 hours of
operation, the filter indicator light
illuminates. This feature is a
reminder to clean the Air Filter
for more efficient operation.
Press this button for 3 seconds
to cancel the reminder.
Timer button
Used to initiate the AUTO ON
start time and AUTO OFF stop
time program, in conjuction with
the + & - buttons. The timer
on/off indicator light illuminates
under the timer on/off settings.
Mode button
Selects the appropriate operating mode. Each
time you press the button, a mode is selected
in a sequence that goes from AUTO, COOL,
DRY, FAN and HEAT (cooling only models
without).The mode indicator light illuminates
under the different mode settings.
NOTE: On dry mode, you can adjust the
humidity for models with humidity sensor.
Power button
Power switch on/off.
Up (+) and Down (-) buttons
Used to adjust (increasing/decreasing)
temperature settings in 1°C/1°F increments in
a range of 17°C/62°F to 30°C/86°F or the
TIMER settings in a range of 0~24hrs or The
humidity settings in a range of 35%RH(Relative
Humidity) to 85%RH(Relative Humidity) in 5%
increments(only for models with humidity sensor).
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other,
press and hold the Up and Down buttons at the
same time for 3 seconds.
Swing button
Fan/Ion button(Ion is optional)
Used to initiate the Auto swing
feature. When the operationis
ON, press the SWING button
can stop the louver at the
desired angle.
Control the fan speed. Press to
select the fan speed in four
steps-LOW, MED(optional), HIGH
and AUTO. The fan speed
indicator light illuminates under
different fan settings except AUTO
speed. When select AUTO fan
speed, all the fan indicator lights
turn dark.
NOTE: Press this button for 3
seconds to initiate ION feature.
The ion generator is energized
and will help to remove pollen
and impurities from the air, and
trap them in the filter. Press it for
3 seconds again to stop the ION
feature.
10