AD-01
Slave PSTN Auto Dialer - Installation &
Programming guide
P
Please read these instructions before you start the installation
Features
• LCD display
• Dual Triggers
• Programmable 9 x 32 digit phone numbers for each trigger.
• Programmable as Silent Alarm (dial only) or Audible (siren + dialer)
.
• Cancel Message and Alarm at remote telephone using * Key or
cancel message only using # Key
• 10 second duration recordable message for each trigger
• Built in memory for telephone numbers and programmed settings
Contents
• 1 x Auto Dialer
• 1 x Telephone cable
• 1 x Fixing kit and Installation & Programming guide
Preparation
MIC
AutoDialer
Tools required:
• Small cross head screw driver
• Large cross head screw driver
• Number 6 masonry drill bit
• Hammer drill
• Small hammer
• Pencil, ruler and spirit level
The Auto Dialer.
Important:
before you install the Auto Dialer please take these into consideration.
1. Position the Auto Dialer near a phone socket.
2. Before you start to drill holes check for hidden wires and pipe work.
3. Keep the Auto Dialer out of reach of small children.
