2011 Silver Series Exterior Solar Shade
Description
Part Number
Qty Included
Clutch Bracket
CB10
1
Plug Bracket
PB10
1
Bracket Cover
BC10
2
Clutch with chain (pre-installed)
C10
1
Plug with pin (pre-installed)
P10
1
Bottom Rail (pre-installed)
BR10
1
Bottom Rail Caps (pre-installed)
BRC10
2
Fabric
F9
1
Screws (not shown)
SCR9
5
Chain Safety Device
CSD10
1
Bottom Rail Ring (pre-installed)
BRR9
2
INSTALLATION INSTRUCTIONS
Warranty and maintenance
To clean your shade simply rinse with water and scrub with any non-abrasive cleaner (us-
ing bleach or other abrasive cleaners will void your warranty). Roll the shade down to air
dry.
Your Solar Shade fabric has a warranty of three (3) years.
Step 4: Install Chain Safety Device
The Chain Safety Device keeps the chain secure
and reduces the risk of strangulation. The
Chain Safety Device is pre-installed on the
chain.
Install the Chain Safety Device in a location that
keeps the chain tight (see Fig. K).
If a wood stud is not available, you will need
to use an anchor (not included). See your local
hardware store for more information.
303.652.6164 (p)
Figure K
Moving chain to left side of the shade
Clutch Bracket
(CB10)
Figure A
1/1/2011
Securing your shade
Your shade has Bottom Rail Rings pre-installed on the Bottom Rail. These rings can be
used to secure your shade during slightly windy conditions. You may use a screw, nail,
S-hook, or any other device to secure your shade.
Always roll your shade up during windy conditions.
Clutch (w/ chain)
(C10)
Plug (with pin)
(P10)
Plug Bracket
(PB10)
Bottom Rail Cap
(BRC10)
Chain Safety Device
(CSD10)
Bottom Rail Ring
(BRR9)
Bracket Cover
(BC10)
Fabric
(F9)
Bottom Rail
(BR10)
Tools required: phillips screwdriver, leveling device (laser level, standard level, etc.), and
power drill (if pre-drilling the holes).
Your shade is already prepared for the chain to be located on the right side of the shade. If
you want to move the chain to the left side of the shade, you will need to rotate the metal
disc in the Plug Bracket (Fig L).
No change is needed to the Clutch Bracket, you only need to rotate the Clutch so the chain
hangs down, towards the ground.
www.keystonefabrics.com
Note: your parts may differ in color than those shown in this manual
Figure L
