3.1 - Installation Instructions
Installing the USB Twin Serial Adapter Software for Mac OS
Note: These instructions apply to installing the Keyspan USB Twin
Serial Adapter on Mac OS 8.6 through 9.x. If you are installing this
software on Mac OS X via CLASSIC, please read the Keyspan USB
Serial Software for Mac OS X User Manual or visit Keyspan's
web page <http://www.keyspan.com> before proceeding.
Step 1
-
Insert the Keyspan Serial Adapter CD-ROM
Turn your computer ON. When your computer starts up, place the Keyspan USB Twin Serial
Adapter CD into the CD-ROM drive. When the CD icon appears on your desktop, double click
on this icon to display its contents.
Locate the Keyspan Mac OS 8.6 - 9.x folder and then locate the Keyspan USA28X Installer for
Mac OS.
Step 2
-
Run the Keyspan USB Serial Software for Mac OS Installer
If the Keyspan Adapter is connected to your computer, disconnect it now.
Run the Keyspan USA28X Installer for Mac OS by double clicking the installer icon. This will
start the installer. Once the installer is running, follow the instructions on screen.
The installer will install the following items:
• " KeyspanUSBLoader"
(in the Extensions folder)
• "KeyspanUSA28XDrvr"
(in the Extensions folder)
• "
"
(in the Control Panels folder)
• "Keyspan Manager"
(in the System Folder folder)
Step 3
-
Software Installation Complete!
Now that you have installed the Keyspan USB Twin Serial Adapter software, you are ready to
install the Keyspan USB Twin Serial Adapter hardware. Please proceed to the installing the
Keyspan USB Twin Serial Adapter Hardware instructions.
(continued on next page...)
Keyspan:USB Twin Serial Adapter for Mac OS-v1.9 User Manual
This User Manual applies to the Keyspan USB Twin Serial Adapter Software for Mac OS.
(rev 02may12JA)
Page 5
