Keysight Y1217A Rack Mount Rail Kit Installation Note
3
Procedure
Keysight Y1217A Rack Mount Rail Kit Installation Note
6
Attach the support rails (with inner flange pointing downward) to the rack’s
inside vertical columns. Use four channel nuts and the four 10-32 x 0.5 T25
Torx pan head screws as shown in
7
Set the chassis onto the support rails.
8
Set the M9018A chassis onto the support rails.
9
Slide the M9018A chassis into the rack until the rack mount front handle
flanges are against the rack’s vertical columns. Secure the chassis to the rack
using the adapter dress screws provided with the rack flange kit.
Figure 2
Center Holes of Rack, Attaching Channel Nuts
Important: Install support
rails with inner flange
pointing downward
Channel nuts on
rack’s inside
vertical rails
To prevent injury during rack mounting, the chassis should
be empty and two people should lift it into the rack.
If the rack will be moved excessively or over long distances, you
should use a strap to secure the chassis to the rack slides.