1
Introduction
34
Keysight U1241C/U1242C User’s Guide
Power-on options
Some options can be selected only while you turn the multimeter on. To select a
power-on option, press and hold the specified key while turning the rotary switch
to any other position (OFF to on). Power-on options remain selected until the
multimeter is turned off.
Table 1-2
Power-on options
Key
Description
Accesses the multimeter’s Setup menu. Press this key for > 1 second to exit the
Setup menu.
Simulates the APO (auto power off) mode. Press any key to turn the multimeter
back on and resume normal operation.
Tests the LCD. All LCD annunciators are lit. Use this mode to verify that there are
no defective LCD annunciators. Press any key to exit this mode.
Turns on the flashlight. Press
or
to change the brightness level (with
the backlight turned on at the same time). Press
for > 1 second to exit
this mode.
Shift
Esc
View
Hz
MaxMin
Hold
Log
Vsense
Shift
Esc
View
Содержание U1241C
