Keysight TS-5020, Руководство по подготовке места и установке

Страница: 38 / 45

3-14 TS-5020 Automotive Electronics Functional Test System Site Preparation and Installation Guide
3
Site Preparation and Power Requirements
System Transportation Instructions
The system is shipped from the factory on one pallet with a few
smaller boxes.
Ramp Requirements
The cabinet will negotiate ramps with inclines up to 8 degrees
before the leveling feet drag on the floor when moved on its
casters.
Hallway and Door Width Requirements
Make sure that all doors, elevators, and passageways enroute to
the system’s final location are large enough to allow passage of
the crated system. The crated system requires the use of a floor
jack or fork lift to engage the pallet and lift the crated system.
Consider this when evaluating hallways, doors and elevators
along the route the system must travel.
If the System Cannot be Moved in the Crate
If obstacles or lack of space restrict moving the crated system,
remove the system from the pallet in the receiving area and
push it on the cabinet casters to the final destination.
The system is equipped with four rack mounted casters for easy
movement throughout the facility. Due to weight distribution of
instrumentation, the system is most stable during movement
when you push from the front with the back of the rack leading.
Always push the rack in this front-to-back direction during
movement. Avoid side-to-side or back to front movement except
for final positioning.
WA R N I N G
Deploying the rack from its shipping carton requires moving it in
the Back- to-Front direction. NEVER stand directly in front of the
rack when loading or unloading from a shipping carton.