Keysight PD1000A, Руководство для стартапов, Страница: 50 / 108

48 Keysight PD1000A Power Device Measurement System Startup Guide
IV and CV Device Characterization Running the IV and CV Tests
Configure Settings
1 Select the Settings menu in the upper left corner of the display window.
2 Select Global Settings . This displays the Global Settings dialog:
a Debug Mode:
Causes the system to send a SCPI SYST:ERR? command after
each command to identify any errors in the system measurements. Use the
IO Monitor
utility in the IO Libraries Suite to view the error messages.
b Output Directory:
Lists the directory (folder) on the host PC to which the IV
and CV characterization data gets saved. Keysight’s PD1000A Control
Software uses the
EasyEXPERT format and saves the IV and CV test data
with the Keysight IC-CAP Model Data Manager
*
file (*.mdm). There is no
default path or folder, so you must specify the path.
-- Click
Select
to choose a folder on the Host PC. For example, you might
create a folder such as: PD1000AControl .
-- If you have already chosen a folder and want to see it displayed in a File
Explorer window, click
Show in Explorer
to display the folder contents.
c To save settings and close the dialog, click the X icon in the title bar.
For file structure information, see “IV and CV Test Output File Structure” on
page 61.
Figure 20
IV and CV Characterization Test Configure Common Settings Editor
* MDM data files are an industry standard file format used by the Keysight ADS modeling program for statistical
analysis of device characterization data.
You must supply this directory path when you import the
characterization data into the PEMG software. See
“Power
Electronics Model Generator (PEMG) Software” on page 79