Keysight N7744A, Руководство пользователя

Страница: 58 / 105

Figure 40 Trigger Configuration
2
Set the trigger configuration
By default, the trigger level at the external trigger connector is active
high. This means when a trigger rises above the high TTL level (rising
edge), a trigger is accepted.
You can select three modes of triggering from the trigger
configuration menu:
• <Disabled>, if you do want to disable triggering.
• <Default> to enable the trigger connectors.
• <Pass Through> if you want an input trigger to automatically
generate an output trigger. This lets you trigger another
instrument almost simultaneously.
3
Set the input trigger functions
The power meter ports can be configured individually to respond to
an input trigger by:
• <Ignore> The trigger is ignored.
• <Single Measurement> The trigger causes a single power
measurement to be made.
• <Complete Measurement> The trigger will cause an active
measurement function like logging to begin and continue until
completed.
4
Set the output trigger functions
Power Measurement
2
Keysight N774x Series 57